Description; Features; Front Panel - Omnitronic MLM-81 Bedienungsanleitung

Never remove the serial barcode from the device as this would make the guarantee void.
Please consider that unauthorized modifications on the speaker-system are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, hearing loss etc.

4. DESCRIPTION

4.1 Features

Microphone Line Mixer, 8 channels
The OMNITRONIC MLM-81 is a 8-channel mixer, for mixing units with line output (e.g. CD players,
tape decks, tuners) and microphones to a mono output channel. Hence, the MLM-81 is suitable e.g. as pre-
mixer for a microphone group (chorus, drums, etc.) or as mixer in PA systems.
• For mixing up to 8 mono input signals to 1 mono output
• 8 mic/line channels with separate level and tone controls and signal LEDs
• Each channel with balanced XLR mic input and unbalanced 6.3 mm (1/4") jack input
• Each mic input with optional 12 V phantom power via dip switches
• Master level control; master out via balanced 6.3 mm (1/4") jack
• Feed-through output (independent of master control) for connecting a further MLM-81
• Each line input can be converted internally to a line output
• 19" dimensions for rack installation, 1 U
The MLM-81 is designed for professional application. The connectors are located on the rear panel; the
operating elements are on the front panel. Channels 1 to 8 are identical.

4.2 Front panel

1. POWER ON/OFF
Press this button, to turn on the MLM-81.
2. POWER LED
The power indicator lights up when the MLM-81 is powered on.
3. MASTER LEVEL CONTROL
Volume control MASTER LEVEL for adjusting the level at the output MAIN OUT on the rear panel.
4. TONE CONTROL
Determines the ration of highs and lows.
5. LEVEL CONTROL
Adjusts the part of the respective channel of the overall signal at the output MAIN OUT.
6. SIGNAL LED
This indicator lights up when a input signal is available at the respective channel.
15/19 00030198.DOC, Version 1.1