Safety Measures; Preparation For Operation; Using The Blender - Vitek VT-1474 ST Die Betriebsanweisung

ENGLISH
TABLE BLENDER
Description
1. Blender bowl measuring cup
2. Blender bowl lid
3. Glass jar 1,5 l
4. Sealing gasket
5. Blades set
6. Blender bowl base
7. Motor unit
8. Operating modes switch
9. Non-slip feet

SAFETY MEASURES

Before using the unit read the instructions
carefully and keep them for future reference.
• Before using the appliance for the first
time make sure that the electricity supply
corresponds to the voltage of current
specified on the housing of the unit.
• Never use the unit outdoors.
• Always unplug the unit if you do not
use it. Do not leave the operating unit
unattended.
• Always check whether the blades set is
inserted properly before operation.
• Do not touch the blades. The blades are
sharp!
• During operation do not immerse your
fingers or any other objects into the
blender bowl.
• In case of unexpected blades stop, unplug
the unit before removing the ingredients,
which blocked the blades.
• Do not overload the blender bowl with
products and check the level of the liquids
in it.
• Remove products and pour out liquids
from the bowl only after the blades have
stopped completely.
• In order to avoid risk of electric shock or
fire, do not immerse the motor unit into
water or other liquids.
• Do not allow children to play with the unit.
• Keep the unit out of reach of children and
disabled persons. Do not allow them to use
the unit without supervision.
• This unit is not intended for usage by
children or disabled persons unless they
are given all the necessary instructions on
safety measures and information about
danger, which can be caused by improper
usage of the unit.
• Use only the accessories supplied with
the unit.
• Provide that the power cord does not touch
sharp objects or hot surfaces.
• Do not pull the power cord, do not twist it.
• Do not use the unit if the power cord is
damaged.
• Do not try to repair the unit yourself. If
there are any damages in the unit apply to
the authorized service center.
• The unit is intended for household usage
only.
• Do not switch the unit on without food
inside.

Preparation for operation

• Unpack the blender.
• Before using the appliance for the first
time make sure that the electricity supply
corresponds to the voltage of current
specified on the housing.
• Before using the unit, wash all the
removable parts with warm water with a
soft detergent and dry them thoroughly.
Wipe the body of the blender with a soft,
slightly damp cloth.
• Do not immerse the body of the blender
into any liquids and do not wash it with
water.
• Place the blender on the flat stable
surface.

Using the blender

The unit is intended for chopping products,
ice, mixing of different ingredients, making
cocktails.
• Place the blender bowl base (6) on the
motor unit (7), by matching the marks on
the bowl base (6) and the motor unit (7),
rotate the blender bowl (3) clockwise until
bumping.
3 3
ENGLISH