Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Attachments
1.
If required, mount one of the three attachments (magnet, hook, mirror) into the small recess 1.
below the camera head.
2.
Before use, ensure that the mounting ring of the attachment is locked.
Ring bolt
There is a ring bolt fitted above the monitor. Attach this bolt to a carrying strap (not included), if
required, to facilitate hands-free operation.
10.
dETACHABLE dISpLAy
You can detach the display from the endoscope, if required. The camera picture will then be transmitted
via the monitor cable to the display. For this, proceed as follows:
1.
Slide the display upwards, toward the gooseneck, and remove the display.
2.
Connect the micro USB plug of the monitor cable to the matching connection on the left side of
the display unit.
3.
Connect the monitor cable's mini USB plug to the matching connection on the endoscope. This
connection can be found where previously the display was attached.
4.
Now turn the endoscope on. The camera picture appears on the display.
11.
ConnECTIng To A TV
1.
Connect the video cable jack with the matching socket on the endoscope and connect the cinch
plug with the video input of the TV set.
2.
This will make the image on the display go off, and the camera image will then be displayed on
the TV screen.
12.
mAInTEnAnCE And CLEAnIng
•
The device requires no servicing on your part apart from occasional cleaning. Only use a soft,
anti-static and lint-free cloth for cleaning.
•
Do not use abrasive or chemical cleaners.
•
Flush the gooseneck camera thoroughly with clean water after each use in liquids and dry it off
before returning it to the case.
•
To clean the camera lens, use a small brush or cotton swab.
19
Werbung
Inhaltsverzeichnis
