Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Sage the Boss To Go BPB620 Kurzanleitung

Vorschau ausblenden Andere Handbücher für the Boss To Go BPB620:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

IMPORTANT: There is a risk of pressurisation from
hot water and / or detergent.
When rinsing by attaching blades and blending /
shaking, never add hot or even warm water,
as the steam produced can create dangerous
pressurisation.
Do not add detergent, as the foam produced
will expand and may cause pressurisation.
Dishwasher
The cups, lids and blade assembly may be
washed in the dishwasher on the top shelf only.
Stubborn food stains and odours
Strong smelling foods such cumin and coriander,
and some vegetables such as carrots may leave
an odour or stain the blades, cup or lid.
To remove, pour warm soapy water and fill to the
MAX mark. Set aside to soak for 5 minutes. Then
wash with a mild detergent and warm water, rinse
well and dry thoroughly. Store cups with lids off.

Troubleshooting

Motor doesn't start or
blade doesn't rotate
Blender stopped
suddenly while in use
Food is lumpy or
unevenly blended
Food sticks to
blade and cup
• Check that the power plug is properly inserted into the power outlet.
• Overload Protection System may have operated (see below).
• This extractor has overload protection to prevent damage to the motor,
which may have operated. Unplug, remove the cup and allow the motor
to cool down for 30 minutes. Once cooled, you will be able to use
as usual again.
• We recommend blending in smaller batches, or cutting ingredients into
smaller pieces. See Overload Protection System section for detailed
information.
• This can happen when too much food is being blended at one time.
Try a smaller amount, and work in batches if necessary.
• The ingredients may be too large. Try cutting into smaller pieces.
For best results, ingredients should be in pieces no larger than 2cm.
• The mixture may be too thick. Try adding more liquid and / or pulsing
the blender.
Citrus
Exposure to citrus oil may affect the clarity and
longevity of the Tritan cups. After washing in
detergent, rinse with plain water thoroughly, and
allow to dry immediately. Do not soak if citrus has
been blended.
Storage
Store upright with the cups and blades assembled
and resting on the motor base, or beside it.
Do not store with the cup turned to the ON position,
as this means the motor is engaged and will turn
on immediately when plugged in or switched on
at the wall.
EN
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis