Bosch ALM 28 Bedienungsanleitung Seite 12

EURO • Printed in England • BA F 016 L69 849 • ALM 28/30 • GB • OSW 10/01
ALM 28/30.book Seite 2 Freitag, 19. Oktober 2001 9:05 09
Product Specification
Quiet Lawn ALM 28
Mower
Part number 0 600 887 4.. 0 600 887 2..
Rated power [W] 1 000
Maximum
cutting width [cm] 28
Height of cut [mm] 20/30
Positions 2
Weight [kg] 4.6
Protection
class
Serial Number See rating details on
machine
Intended Use
This product is intended for domestic lawn mowing.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approxi-
mately 4.6 kg. If necessary, obtain assistance to re-
move from packaging.
Delivered Items
Carefully remove the machine from its packaging
and check that you have all the following items:
– Lawnmower with handle assembly
– 1 Handle bottom
– 2 Bolts
– 2 Wing nuts
– 2 Pivot pins
– 2 Cable clips
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
12 • F 016 L69 849 • TMS • 16.10.01
ALM 30
1 000
30
20/30
2
4.6
/ II / II
English - 2
Operating Controls
1 Switch lever
2 Safety button
3 Handle top
4 Mains plug**
5 Cable restraint
6 Handle bottom
** Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
For Your Safety
Warning! Switch off, remove plug from mains
before adjusting, cleaning or if cable is cut,
damaged or entangled.
The blades continue to rotate for a few sec-
onds after the machine is switched off.
Caution - do not touch rotating blades.
Electrical Safety
Your machine is double insulated for safety and re-
quires no earth connection. The operating voltage is
230 V AC, 50 Hz. Only use approved extension ca-
bles. Contact your service agent for details.
Extension cords/leads should only be used if they
comply with H05VV-F or H05RN-F types.
It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.
For products not sold in GB: WARNING: For
B
safety, it is essential that the mains plug 4 at-
tached to the machine is fitted to the power sup-
ply cable 10.
The couplings of connection leads must be pro-
tected against splashes and the coupling sockets on
the leads must be made of rubber or coated with
rubber.
Fixing means for the connection leads must be used.
The connection lead must be inspected for signs of
damage at regular intervals and may only be used if
in perfect condition.
If the supply cord is damaged, it must be replaced by
a Bosch Service Center.
Products sold in GB only: Your mower is fitted with
an approved 13 A (BS 1363/A) electric plug and is
protected by a 13 A fuse (ASTA Approved to
BS 1362).
If the fitted plug is not suitable for your socket out-
lets, it should be cut off and an appropriate plug fit-
ted in its place.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be inserted
into a 13 A socket elsewhere.