Before First Use; Operation; Cleaning And Storing - Wetekom 86 81 50 Bedienungsanleitung

Before first Use

Unpack the heater and check the unit for any damage in transit. Dispose of
packaging materials or store it out of reach of children. Plastic bags etc. may
become a deadly toy for children. Before first use, clean the housing as described
in chapter "Cleaning".
Attach the foot (F) with the included screws.

Operation

Turn the unit on with the toggle switch (D). This switch turns on the middle
heating element. The upper and the lower heating element can be turned on with
the switches (C) and (B). With the switch (D) the unit can be turned on or off in all
modes of operation.
With the switch (A) the pivoting function can be turned on and off.
Attention: In any case make sure no combustible materials or surfaces are
closer than 1 m in front of or above the heater.
The unit is equipped with a safety device which will turn the eater off in case it
falls over.

Cleaning and Storing

 Before cleaning, first unplug the unit. Do not pull the cord to unplug from the
wall socket but grasp the plug itself to unplug.
 Do not wipe the heater with sharp detergents or aggressive chemicals in order
not to damage the surfaces.
 Wipe the heater with a lightly moistened cloth. Use detergent as needed. Do
not immerse it in water or any other liquid. Dry all parts well before storing.
 Clean the air vents with a brush.
 Never try to clean the interior of the heater. Do not open the unit.
 Let the heater fully cool down before storing.
 Make sure that liquids cannot enter the air vents.
 Store the heater in a dry place that is protected from dust, dirt and extreme
temperatures.
 Store the unit out of reach of children.
Operation
7