Inhaltsverzeichnis
Werbung
Before first Use
Unpack the convector heater and check the unit for any damage in transit.
Dispose of packaging materials or store it out of reach of children. Plastic bags
etc. may become a deadly toy for children. Before first use, clean the housing as
described in chapter "Cleaning".
Assembling
For transport protection, the stand supports (C) of the
convector heater are not attached.
Fasten the stand supports on the base plate. Use the small
screws (G) included in the package. The unit has to be
placed on a firm, level ground.
Operation
The unit is equipped with two toggle switches (D) and (E) for setting up three
heating stages. Additionally it features a steplessly adjustable thermostat (F).
Operation
Switch (D) and (E) switched off = Heater OFF
Switch (E) switched on = 750 W heating stage
Switch (D) switched on = 1250 W heating stage
Switch (D) and (E) switched on = 2000 W heating stage
9
Werbung
Inhaltsverzeichnis
