Helmet Fitting - Rosenbauer FPS7000 Serie Verwenderinformation

Rosenbauer – HEROS-titan mask adapter

3.1 Helmet fitting

(1) Set and adjust the helmet according to the manual.
(2) Grab the helmet with both hands, with the chin strap open.
(3) Pull the helmet over the head from the forehead.
(4) Only close the chin strap after the mask is properly fitted.
ATTENTION! Adjust the mask adapters before placing on the helmet so that the tug
point is optimally adjusted for the respective head size.
For small head sizes under 55 cm, we recommend selecting the mid-upper position -
see positions 4 and 1.
And for head sizes from 61 cm to select the mid-lower position, see position 2 and 5.
If the MHK is not close to these two positions, positions 6 and 3 can also be selected.
16