Installing And Fixing The Supports - Rointe KYROS conservatory Bedienungsanleitung

3.2. Installation and fixing the supports
Inside the product packaging you will find a fixing kit so you can mount the product to the wall. Please
follow these instructions carefully.
Choose the right part of the wall
(see section 3.1. for minimum
distance from wall).
Place the mounting stencil on the
wall, marking the places for the
holes.
Installing Template measurements dependent on the model:
KRI1100RADC3
KRI1300RADC3 / KRI1500RADC3
Once you have marked the holes,
remove the stencil and make the
holes in the wall.
Fix the supports using the plugs
and screws provided (or others
suitable for the wall type).
Check the positioning is correct
of the lower support.
Align the product with the top
supports.
Once aligned, place the product
in the supports.
19