The screen will automatically go into sleep mode if no button is pushed for 10 seconds. By
pushing the button again the towel rail will go into standby mode with the word "Standby"
appearing followed by the Rointe logo.
1.3. Setting the day and time
By pressing the button
adjust the time and date of our towel rail.
Pressing the button
number of times it is pressed. With the buttons
To leave the time and date adjust feature, wait 30 seconds or press
1.4. Locking the Control Panel
By pressing the keys
the control panel symbol
key is pressed this image will appear in the screen of the towel rail:
To unlock, repeat the same procedure pressing the keys
seconds.
1.5. Selection of Temperature
By pressing
one set, heated the towel rail goes on, the
1.6. Manual/Automatic Mode
By pressing
is selected,
the symbol
1.6.1. Manual Mode
This enables to choose between the modes of operation COMFORT, ECO and ANTI-FROST,
changing the temperature as indicated in Section 1.4.
1.6.2. Automatic mode
This mode activates the programming set on the heated towel rail.
1.7. Two-hour Boost Mode (2h)
By pressing the key
Downloaded from
www.Manualslib.com
for 3 seconds, we can access the time and date adjust feature to
, flashes up the hours, minutes and days of the week according to the
and
is activated, and the keys will not respond when pressed. If one
or
we set the temperature. When the room temperature is lower than the
we change between the Manual and Automatic mode. When the manual mode
the symbol
appears on the display. When the automatic mode is selected,
appears on the display.
SYMBOL
, the heated towel rail will work for two hours at maximum power,
manuals search engine
and
at the same time for 3 seconds, we lock the control panel,
symbol appearing.
MODE
TEMPERATURE RANGE
COMFORT
20ºC TO 30ºC
ECO
15ºC TO 19.5ºC
ANTI-FROST
we can alter the current settings.
after the date select.
and
at the same time for 3
8ºC
7