Inhaltsverzeichnis
Werbung
STEP 4 - Select the Hours
Once step 3 has been completed, 0h appears on the display panel. 0h is equal
to midnight. Use the
or
buttons to select the hour you wish to change.
Use the
button to change the mode (COMFORT, ECO or nothing) for the hour
you wish to modify. The corresponding icon for that mode will appear at the top
of the screen. To finish the programming press
or leave for 30 seconds without
pressing any buttons. To change the programming go back to step 1 and proceed
as described before.
*If you wish to have individual days with different programming within your program
you will need to modify each day separately, starting from the Main Menu again
for each day/days. Follow Steps 1 to 4 above to program multiple differing days/
hours/temperatures.
•
PRE-PROGRAMS
To activate a PRE-PROGRAM for your product ensure that PRE-PROGRAM is
highlighted in the `Program´ sub-menu. Press the
button to confirm and the
display panel will show 4 programs for you to choose from: A1, A2, A3 and A4.
Using the
and
buttons, choose the program you wish to activate and once
highlighted, press the
button to confirm. You will then be automatically taken
back to the main display panel and your pre-program option will show on the
screen to confirm it is active.
To MODIFY any of the pre-set programs:
You need to be in AUTOMATIC mode and select the pre-program you want to
modify i.e. your product must be working/have the pre-program already activated
you wish to modify.
Then ensure that START PROGRAMMING is highlighted. Press the
button
to access and the display panel will show a flashing screen. You then need to
follow STEPS 1 - 4 on pages 11 & 12 to modify the temperature/day/hours.
*If you wish to have different days with different programming within your program
you will need to modify each day separately, starting from the Main Menu again
for each day/days. Follow STEPS 1 - 4 on pages 11 & 12 to program multiple
differing days/hours/temperatures.
13
Werbung
Inhaltsverzeichnis
