2.6. Main Menu
The Main Menu is accessed by pressing the menu
through the different options available on the menu by pressing the
buttons to move left and right respectively and to scroll through all 4 options.
The selected sub-menu will be highlighted with a frame, as shown in the image
to the right on the `Settings´
The below icons displayed on the screen take you to the following sub-menus:
Settings
2.6.1. Main Menu: Settings sub-menu
The 'Settings' sub-menu configures the technical parameters of your product.
To access, select the
to confirm.
Use the
and
menu to choose your parameter and press
The below icons displayed on the screen take you to the following parameters:
Display backlight
brightness
•
Adjust display backlight brightness
This allows you to change the brightness of the display panel in both the STAND-
BY and ON modes separately. To change the brightness of the display panel
ensure the
icon is highlighted and press the
with the
and
With the
and
you wish. The cursor indicates the intensity of the light. Once you have set the
required brightness press the
section of the display panel.
Energy
icon displayed in the Main Menu screen and press
buttons to move across the different options on the sub-
Clear Memory
buttons you can switch between the two modes.
buttons you can increase or decrease the brightness as
button to save and exit.
button. You can navigate
Equilibrium
/ Balance
to access.
Language
button to confirm. Then
and
Program
Time
7