Accessories - Bosch Sensixx’x Di90 i-Temp Gebrauchsanleitung

Accessories

The accessories may be purchased from the customer service
or specialist shops.
Descaling liquid
For deep descaling of the
steam iron.
Contents: 4 bottles x 25 ml
Name: TDZ1101
Accessory code: 00311715
Trouble shooting
Problem
The iron does not heat
up.
Water drips out of the
soleplate when using
the "shot of steam"
function.
Steam does not come
out in horizontal
position.
Excessive dripping or
steaming.
The motor does not
work.
Smoke comes out
when connecting the
iron for the first time.
Deposits come out
through the holes in the
soleplate (10).
The appliance makes a
pumping sound.
If none of the above solves the problem, get in touch with an
Authorised Technical Service.
"StoreProtect"
Enables an immediate and safe
storage of the iron, even with a
hot soleplate.
Name: TDZ1750
Accessory code: 00575960
Probable cause
The "SensorSteam" function
has been activated. The iron is
set to stand-by.
You have pressed the shot of
steam button (6) repeatedly
without waiting for 5 seconds
between each press.
Dry ironing steam mode has
been selected.
No proper closing of "clean"
button (11).
The iron is not in a horizontal
position.
This may be caused by the
lubrication of some of the
internal parts.
Traces of lime scale are coming
out of the steam chamber.
Water is being pumped into the
steam chamber.
"TextileProtect"
Used for steam-ironing delicate
garments at maximum
temperature and maximum
steam without damaging them.
Name: TDZ1550
Accessory code: 00575494
Solution
Grip the handle of the iron to
re-start it.
Wait 5 seconds between each
press of the shot of steam button.
Set the steam control to "eco" or
"max" position.
Point the iron away from the
ironing area. Actuate a few times
the "clean" button.
Use the iron in a horizontal
position.
This is normal and will stop after a
few minutes.
Carry out a cleaning cycle (see
"Calc'n Clean function" section).
This is normal.
21
BOS CH