Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Deleting Messages From Memory
Often it is sufficient to read a new message only one time. If you
do not want to store a message, you can delete it while you are
viewing it, or through the function menu. Only messages that
have been read and being unlocked can be deleted.
1.
Display the message to be deleted (see „Receiving and
reading messages").
Press the Function Button # to display the function menu.
2.
Move the cursor (using ! and ") until the Delete Mes-
3.
sage symbol J flashes.
Press # again to select the Delete Messages function and
4.
press # once more to delete the message from memory.
Delete All Messages
You can Delete All Messages from memory at one time. But
only messages that have been read and that are unlocked, can be
deleted.
Press the Function Button # to display the function menu.
1.
Move the cursor (using ! and ") until the Delete All
2.
Messages symbol K flashes.
Press the Function Button # twice, to select the function
3.
and Delete All Messages.
Setting The Alarm
Your pager is equipped with an Alarm feature. This is how to set
the alarm:
Press the Function Button # to display the function menu.
1.
Move the cursor (using ! and ") until the Set Alarm
2.
symbol X flashes.
Press the Function Button # to display the Set Alarm
3.
screen.
4.
Now Set The Alarm time exactely. The active position
flashes. Change the value of the active position using the
! button (LX2) or ý and þ button (LX4). Press " (LX2)
or ! and " (LX4) to move over to the next position.
5.
The left-most position defines the alarm status: alarm
enable (X) or alarm disable (8).To escape from any
field without making changes press ( .
Press # to confirm your alarm settings.
6.
If an alarm has been Set The Alarm Indicator X is displayed
right hand to the date. At the selected time, your pager vibrates
or emits an audible alert. If you do not recognize the alert (you
do not press any button) there will be a repetition in regular
intervals and the alarm symbol X flashes.
Werbung
