Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Magnifier Glass Function
Received messages may also be displayed in large letters for
better readability.
Press the Function Button # to display the function menu.
1.
Move the cursor with the ! and " buttons, until the Mag-
2.
nifier Glass symbol 3 flashes.
Press # again to turn on the Magnifier Glass Function.
3.
4.
Repeat the three steps to turn off the Magnifier Glass
Function 4.
Backlighting
To view your display in low light conditions, turn on your
pager`s backlight by pressing (2 seconds) the Function Button #.
Backlight turns off automatically or by pressing # for 2 seconds,
again.
Setting The User Number
The pager knows up to eight different User Numbers. There are
different Pocsag protocol addresses associated with the User
Numbers (adaption to different users or working fields).
Press the Function Button # to display the function menu.
1.
Move the cursor with the ! and " buttons, until the User
2.
symbol ) flashes.
Press the Function Button # to display the User Number
3.
screen.
Select the wanted User Number using the ! and " but-
4.
tons. To escape without making changes, press ( .
Confirm the chosen User Number by pressing #.
5.
Hint: The user number can also be changed „over the air" by the
paging system`s transmitter (remote maintenance, advanced
pagers only)
Locking And Unlocking Messages
Up to 10 messages can be „locked" in memory, so that they can
be read again at any time. Locked messages are not being re-
placed when your pager`s memory is full and even not being
deleted if the Delete All function K is chosen.
1.
Display the message to be locked (see „Receiving and
Reading Messages").
Press the Function Button # to display the function menu.
2.
Move the cursor (! and " buttons) until the Lock Mes-
3.
sage symbol A flashes.
Press # again to lock the message. The padlock A symbol
4.
appears, indicating the message has been locked.
Repeat steps 1-4, to unlock (I) the message again.
Werbung
