Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Out Of Range Indication
Whenever you are too far away from your paging system`s
transmitter to reliably receive messages, your pager displays the
Out Of Range symbol 1 and a Out Of Range alert is started. If
you do not recognize the alert (you do not press any button) there
will be a repetition in regular intervals and the Out Of Range
symbol 1 flashes.
Setting The Clock
Whenever you turn your pager on it shows you time and date.
Setting The Clock is done this way:
Press the Function Button # to display the function menu.
1.
Move the cursor until the Set Time symbol W flashes
2.
using the ! and " buttons.
Press the Function Button # to display the Set Time
3.
screen.
4.
Now set the time exactely. The active position flashes.
Change the value of the active position using the
! button (LX2) or ý and þ button (LX4). Press " (LX2)
or ! and " (LX4) to move over to the next position. To
escape from any field without making changes press ( .
Press the Function Button # to iniate your changes.
5.
Hint: The clock can also be set „over the air" by the paging
system`s transmitter (remote maintenance)
Setting The Alert Pattern
You can choose the one (out of 16) alert pattern that you like
most and that shall be audible when a message is received.
Press the Function Button # to display the function menu.
1.
Press ! or " until the Set Alert C symbol flashes.
2.
Press # to display the Set Alert screen.
3.
Using the buttons ! and " choose the alert pattern you
4.
like most. The number of the chosen pattern flashes
(„1..16" selectable pattern, „C" pattern fixed by pro-
gramming), the selected alert plays through the internal
speaker. To escape without making changes, press ( .
Confirm your selection by pressing the # button. The
5.
selected alert plays through the internal speaker.
Werbung
