Drc (Dynamic Range Compression); Audio Sync; Hdmi Audio - Samsung HT-D450 Bedienungsanleitung

Place all speakers within this circle.
Df: The distance from Front Speaker
Dc: The distance from Center Speaker
Ds: The distance from Surround Speaker
Setting the Center Speaker
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between 0.00m 0.34m 0.68m 1.06m 1.40m 1.76m
Df and Dc
Delay
00 ms 01 ms 02 ms 03 ms 04 ms 05 ms
Time
Setting the Surround Speaker
If the distance of Dc is equal to or longer than the
distance of Ds in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between 0.00m 1.06m 2.11m 3.16m 3.62m 5.29m
Ds and Dc
Delay
00 ms 03 ms 06 ms 09 ms 12 ms 15 ms
Time
✎
NOTE
`
With PL II (Dolby Pro Logic II), the delay time
may be different for each mode.
`
With AC-3 and DTS, the delay time can be set
between 00 and 15mSEC.
`
The Center channel is only adjustable on 5.1
channel discs.
HT-D450-XU-ENG-0303.indd 25
Ideal Center
Speaker placement
Ideal Surround
Speaker placement
Test Tone
Settings
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone
mMove " Select ' Return
Use the Test Tone feature to check the speaker
connections.
Press the _+ buttons to select On.
~
The test tone will be sent to Front Left ➞ Center
~
➞ Front Right ➞ Surround Right ➞ Surround
Left ➞ Subwoofer in order.
To stop the test tone, press the ENTER button.

DRC (Dynamic Range Compression)

This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
You can select either Full, 6/8, 4/8, 2/8, off.
~

AUDIO SYNC

Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
~ You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.

HDMI Audio

The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
Off : Video is transmitted over the HDMI
~
connection cable only, and audio is output
through the product speakers only.
~ On : Both video and audio signals are transmitted
over the HDMI connection cable, and audio
is output through your TV speakers only.
: On
▶
" Select ' Return

English
2011-03-05 11:38:11