Samsung SR8930 Benutzerhandbuch Seite 129

4. After a cleaning run, fi rst fi x the side of the power brush
opposite to the Power Switch and then fi x the other side.
5. Insert the side into the two grooves and assemble it by
slightly sliding it down until it clicks into place.
• To prevent the vacuum cleaning robot from becoming clogged, be careful not to vacuum tooth
picks or cotton swabs.
CAUTION
• When removing foreign substances becomes diffi cult, contact a customer care center.
• Because the power brush vacuums the dust on the fl oor, long strings or hair can become
wrapped around the brush. Check and clean the power brush regularly.
maintain _37