Delay Start - Samsung SR8930 Benutzerhandbuch

Delay Start

In this mode, you can schedule the cleaner to start a once-off
cleaning run from a particular time.
■
A scheduled cleaning run is only performed when the cleaner is
docked to the charger station.
Blinks Blinks
Blinks Blinks
Blinks Blinks
Blinks Blinks
Canceling the Settings
Timeout
32_ operating
Remote Control
Blinks Blinks
Blinks Blinks
- If you press the Start/Stop button while the cleaner is charging
or you are setting the time, the settings are canceled.
- Please take note that the settings are canceled if the cleaner
is detached from the charger station.
- If there is no input for 1 minute while you are setting the time,
the cleaner exits Time Set mode automatically.
1.
-
Decrease Decrease
Increase Increase
2.
Decrease Decrease
Increase Increase
-
3.
-
-
Confi guration Sequence
Press the Delay Start button.
The current setting is
displayed and blinks.
Press the or button to
set the hour.
Press the Delay Start button.
Press the or button to
set the cleaning mode.
You can select either Auto or
Max cleaning mode.
Press the Delay Start button.
The value you set will
blink and the settings are
completed.
When the settings are
completed, the confi gured
time and are displayed.