Installing The Fire Pit; Operation; Cleaning And Maintenance - tepro Copper Mountain Bedienungsanleitung

t

Installing the fire pit

Attention Risk of damage!
During use, screws can gradu-
ally loosen and as a result
compromise the stability of the
fire pit. Check that all screws
are tightened before use. If
necessary, tighten all screws to
guarantee stability.
• Before use, place the fire pit on a flat,
stable surface outdoors.

Operation

Danger Risk of burning!
The fire pit and the fuel con-
tained therein become very hot
during use. Any contact can
cause severe burns. Always
wear
(Glove Category II with regard
to heat protection, e.g. DIN-EN 407) and
proper clothes.
– Keep away from hot parts as any con-
tact can cause severe burns.
– Do not wear any clothing with wide
sleeves.
Danger Risk of burning!
Never use liquids such as ben-
zene, turpentine, denatured al-
cohol, etc. for lighting or re-
lighting.
ignite explosively and are to
some extend poisonous. Use a
dry lighter or chimney starter
instead.
– Never add lighter fluid or charcoal/
wood dampened with lighter fluid to hot
or warm charcoal/wood.
16
P180158-TEPRO_01391_CopperMountain_Feuerstelle_DE_GB_20180815.indd 16
All manuals and user guides at all-guides.com
heat-resistant gloves
Such substances
– Only use dry lighters or special grill
lighter fluids according to EN 1860-3
for lighting.
1. Make a pyramid from small wooden
pieces.
2. Place the dry lighter inside the
pyramid.
3. Set the dry lighter on fire.
4. Once the small wooden pieces are
burning, you can add larger wooden
pieces.
Danger Risk of burning!
Always make sure the fire does
not get too big. Never leave
open fire or ember unattended.
Danger Risk of injury!
Improper repairs can cause the
device to not function safely
anymore. That creates hazards
for you and your surrounding.
Cleaning and
maintenance
Your fire pit is made of high-quality mate-
rials. To clean and maintain the surfaces,
please heed the following instructions:
Danger Risk of burning!
Let the fire pit cool down com-
pletely before cleaning.
– Empty the ashes once the fuel has
burned down completely and is out.
Health hazard!
Do not use any paint solvents or
thinners to remove stains.
15/8/2018 12:36 PM