AEG SANTO D 7 12 40-5 i Gebrauchs- Und Einbauanweisung Seite 34

Open the appliance door and the fur-
niture door at 90°. Insert the small
square (Hb) into guide (Ha). Put
together the appliance door and the
furniture door and mark the holes as
indicated in the figure.
Remove the brackets and mark a
distance of 8 mm from the outer
edge of the door where the nail
must be fitted (K).
Place the small square on the guide
again and fix it with the screws sup-
plied.
Should the lining up of the furniture
door be necessary, use the clearance
of slots.
At the end of operations, it is neces-
sary to check if the door of the fur-
niture closes properly.
34
8mm
Hb
PR167
8mm
K
Hb
PR168
Ha
Ha