Place guide (Ha) on the inside part of
the furniture door, up and down as
shown in the figure and mark the
position of external holes. After
having drilled holes, fix the guide
with the screws supplied.
Fix cover (Hc) on guide (Ha) until it
clips into place.
Open the appliance door and the
furniture door at 90°. Insert the
small square (Hb) into guide (Ha).
Put together the appliance door and
the furniture door and mark the
holes as indicated in the figure.
32
ca. 50 mm
ca. 50 mm
Ha
Hc
PR33
8mm
Hb
PR167
90°
90°
Ha