General Directions For Use - Fleem SRE 4010 NF Gebrauchsanweisung

GENERAL DIRECTIONS FOR USE

Below you will find the main steps to be taken for using your heater. For more details,
please refer to Chapter A.
1
Remove all packaging materials (refer to chapter A, fig. A).
2
Fill the removable tank (refer to chapter B, fig. C).
3
Insert the plug into the wall-socket.
4
Ignite the heater using the
5
If required, change the temperature using the adjustment
buttons (refer to chapter F).
6
Switch off the heater by pressing the
•
As a fire precaution, the tank must be filled either when the heater has been
switched off or in another room than the room where the heater is installed.
•
Always ensure that the tank is closed properly after filling it at a safe distance from
all sources of heat and open flames (see chapter B).
•
The first time the heater is ignited it will smell like "new" for a short time.
•
Store all fuel containers with their original caps and seals in a cool and dark place.
•
Fuel ages. Use new fuel at the start of every heating season.
•
Before changing brands and/or types of fuel make sure that the mobile heater first
completely empties all of the remaining fuel inside the heater.
•
Avoid contact with the grill which can become very hot.
Manual SRE4010NF.indd 28
key (refer to chapter D).
key. (refer to chapter H).
GB
28 28
12-8-2010 14:52:36