Emission Levels - Protool DRC 18-4 Compact Originalbetriebsanleitung

5.3

Emission levels

Levels determined in accordance with EN
60745 are typically:
Sound pressure level
Noise level
Measuring uncertainty
allowance
CAUTION
Operating noise
Damage to hearing
Use ear protection!
Vibration emission value a
three directions) and uncertainty K mea-
sured in accordance with EN 60745:
Drilling into metal
Fastening
The specified emissions values (vibration,
noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
loads during operation.
– They represent the primary applications of
the power tool.
Increase possible for other applications, with
other insertion tools or if not maintained ad-
equately. Take note of idling and downtimes
of machine!
6 Operation
6.1 Charger cable holder[3-3]
Unwind the cable completely from the
recess before using the charger.
6.2 Changing the battery pack
Removing the battery pack[2 B]
Inserting the battery pack [2 A]
6.3 Charging the battery pack [3]
The battery pack is delivered partially
charged. Charge the battery pack com-
pletely before using for the first time.
The LED [3-2] on the charger indicates the
respective operating status of the charger.
L = 69 dB(A)
PA
L = 78 dB(A)
WA
K = 3 dB
(vector sum for
h
2
a < 2,5 m/s
h
2
K = 1,5 m/s
2
a < 2,5 m/s
h
2
K = 1,5 m/s
LED yellow - lit continu-
ously
Charger is ready to use.
LED green - flashing
quickly
Battery pack is charged to
maximum capacity.
LED green - flashing
slowly
Battery pack is charged with
reduced current. LiIon is
charged to 80 %.
LED green - lit continu-
ously
Charging is complete or is not
restarted as current charge
status is greater than 80%.
LED red - flashing
General fault display, e.g.
incomplete contact, short cir-
cuit, defective battery pack,
etc.
LED red - lit continuously
Battery temperature is out-
side the permitted range.
6.4 Light and battery capacity indi-
cator
The LED on the lamp [1-3] is both a
light and a battery capacity indicator
[1-2].
The LED automatically indicates the charging
state of the battery pack (not NiCd and NiMH
battery packs) when the on/off switch [1-4]
is pressed.
11
DRC 18-4 Compact
LED green – lit continu-
ously: charged > 60 %
LED green – flashing
slowly: charged 30 % – 60
%
LED green – flashing
quickly: charged 0 % – 30
%
LED yellow – lit continu-
ously: battery is empty
LED red – lit continu-
ously: battery temperature
is outside the permitted
range.
GB