Connect IT CMO-3589 Serie Benutzerhandbuch Seite 6

PROFESSIONAL GAMING MOUSE
CMO-3589 series
You can further edit the created macro, if you click on the symbol (
EN
Insert before
5
Insert after
Insert XY
Insert DPI
Insert LED
Insert Delay
You can also edit the macro by right-clicking on an item in the macro to open a menu of these options:
Change parameters
Delete option
You can also adjust how you activate the macro in three ways:
Loop to release
Loop to re-click
Start the loop
Performance
In this section you can adjust:
■ Mouse sensitivity in levels from 1 to 11.
■ Scroll speed in levels 1 to 11
■ Double-click speed ranging from 8 ms to 300 ms
■ Mouse DPI size in 17 levels - 200/400/600/800/1000/1200/1400/1600/1800/2000/2400/3200/4000/4800/5600/6400/7200 DPI. DPI can be
stored in 6 categories and each category can be assigned a colour.
Inserts in front of the selected location - a left mouse click, a mouse wheel press, and a right mouse click.
Inserts behind the selected location - a left mouse click, a mouse wheel press, and a right mouse click.
Inserts an instruction to move the mouse cursor along the X and Y axis on the selected location.
Inserts an instruction to reset the DPI to the previous value or an instruction to set the DPI value to the desired size at
the marked location.
Inserts backlight control into the macro, where you can adjust the duration, backlight mode and colour.
Inserts delay into the macro.
Change parameters of the selected element in the macro.
Deletes an element from the macro.
You activate the macro by pressing and holding the appropriate key; this will repeat continuously until you release the
key.
You activate the macro by pressing the appropriate key; this will repeat continuously until you press this key again.
Starts the macro by pressing the respective key. You can also set how many times the macro will repeat.
CONNECT IT®️ is a registered trade mark
) in the software, the following menu will open:
R202201-IM-CMO3589
USER MANUAL