Operating Instruction
1.
EN
If changing brake fluid evacuate old fluid
from master cylinder reservoir
2.
Top up to correct level with new brake fluid
3.
Remove Refiller lid and fill with
new brake fluid
www.herthundbuss.com
J9300004
4.
Depress locking lever and place onto reservoir
opening ensuring locating lug enters inside.
Release locking lever and ensure unit is secure
5.
Adjust height of unit so that spout tip is at
max level
6.
Turn tap to "ON" position
Bedienhinweis
7.
Perform brake bleeding in accordance with
manufacture's specifications
8.
At completion of bleeding turn Refiller tap
to "OFF" position
9.
Depress locking lever and remove unit
Ensure brake fluid is at correct level
8
9
J9300004
DE