Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.9 Disconnecting / deleting the memory function
Press and hold the Bluetooth button for approximately 2 seconds to return the speaker to pairing
mode. Alternatively, you can turn the speaker off by holding the power button for approx. 2 seconds.
By pressing „V+" and „V-" buttons for about 2 seconds, you can delete the memory of the speaker.
9. POSSIBLE ERRORS AND THEIR SOLUTION
Speaker can´t be turned on:
Make sure the battery of the speaker is charged or recharge it.
Make sure the USB power supply is plugged into a working
Battery does not charge:
wall outlet properly. Also check the connections of the supplied
USB cable on the speaker and USB power supply.
Check that the speaker and the Bluetooth device to be connec-
ted are switched on and that the Bluetooth function is active. If
No Bluetooth connection
necessary, clear the memory function of the speaker by holding
possible:
down the „V-" and „V+" buttons for approximately 2 seconds
until the LED briefly lights up red.
Make sure the speaker and Bluetooth playback device are
No audio output during
turned on and an audio file is playing. Check the volume set-
playback:
tings of the speaker and playback device.
www.inline-info.com
Check if other Bluetooth devices interfere with the frequency used
Distorted sound:
in the 2.4GHz band. Make sure there are no obstacles between
the speaker and the Bluetooth playback device.
Check the Bluetooth profile. Some Bluetooth playback devices
Function buttons don´t
have operating restrictions in the HFP or HSP Bluetooth profile. If
respond:
necessary, manually change the profile to A2DP. To do this, refer
to your playback device´s manual.
Check if other Bluetooth devices interfere with the frequency used
Low range:
in the 2.4GHz band. Make sure there are no obstacles between
the speaker and the Bluetooth playback device.
10. CONTACT / CURRENT PRODUCT INFORMATION
In case of question on the product please contact manufacturer via live.inline-info.com or by email to
service@inline-info.de. Find the latest product information at www.inline-info.com/woome2.
11. MAINTENANCE AND CLEANING
Always clean InLine® WOOME II with a dry, soft cloth.
11
Werbung
Kapitel
Inhaltsverzeichnis
