Telephoning By Cable; Listening To Music Via Bluetooth; Listening To Music By Cable - Inline WOOME II Bedienungsanleitung

Buttons used to control the telephony via Bluetooth:
• Telephone button: Call answering by pressing once as soon as a call is received. To reject the call,
hold down the phone button. If there is no call, press and hold the button for about 2 seconds to
activate Siri or S Voice (if supported by the mobile).
• V-: Decrease the volume
• V+: Increase the volume

8.5 Telephoning by cable

Connect the supplied audio cable to the line-in jack on the speaker and to the headphone output
of your smartphone. Turn on the speaker, then press the „AUX" button. The LED around the power
button lights green to confirm. Wired, however, the microphone built into the speaker is deactivated,
so you need to speak into the microphone of your smartphone.
Buttons used for wired telephony:
• V-: Decrease the volume
• V+: Increase the volume

8.6 Listening to music via Bluetooth

To establish a wireless connection, first follow the steps described in chapter 8.2 Bluetooth connec-
tion setup or 8.3 Connection setup via NFC.
As soon as the connection is established successfully, you can start an installed app for playing audio
files on your playback device and listen to them via the speaker.
www.inline-info.com
Buttons used to play audio files via Bluetooth:
• Play/Pause: Play and pause an audio file
• V-: Decrease the volume
• V+: Increase the volume
NOTE!
If a telephone call is received while listening to music, the music is muted automatically
and the announcement „Incoming call" sounds. Press the phone button briefly to ans-
Note
wer the call. To reject the call, press and hold the phone button.

8.7 Listening to music by cable

Connect the supplied audio cable to the line-in jack on the speaker and to the headphone output of
your playback device. Turn on the speaker, then press the „AUX" button. The LED around the power
button lights green to confirm. Now you can start an installed app for playing audio files on your play-
back device and listen to them via the speaker.
Buttons used for playing audio files via cable:
• Play/Pause: Play and pause an audio file
• V-: Decrease the volume
• V+: Increase the volume
9