How To Set: Heating Functions; Heating Functions - AEG BPE556360M Benutzerinformation

6.1 How to set: Heating functions

Set a heating function.
Make sure that the oven is cold.
Step 1
Fill the cavity embossment with tap
water.
The maximum capacity of the cavity embossment is 250 ml. Do not refill the cavity emboss‐
Step 1
Turn the knob for the heating
functions to the off position to
turn off the oven.

6.2 Heating functions

Step 1
Steam cooking
ment during cooking or when the oven is hot.
When the steam cooking ends:
Carefully open the door. Re‐
leased humidity can cause
Start cooking
Step 2
Set the steam
Set the tem‐
heating func‐
tion.
Step 2
burns.
DAILY USE
Step 2
Set the temperature.
Step 3
Preheat the empty
oven for 10 min to
create humidity.
Put food in the
perature.
Step 3
Make sure that the oven is
cold. Remove the remaining
water from the cavity em‐
bossment.
Step 4
oven.
167/744