Important Notices - Tescoma President 909060 Gebrauchsanleitung

Before fi rst use
Unwrap the machine and remove transport packaging and fi lms. Wash the accessories under running water and dry. Wipe the body
of the machine with a moistened cloth and dry.

Important notices

Always use the machine with only one set of accessories attached.
When attaching and replacing accessories, always make sure that the machine has stopped entirely; the connecting pieces
continue to rotate for a short while after the machine has been switched off . Therefore, we recommend always unplugging the
machine from the grid when attaching or replacing accessories.
The machine will be automatically switched off after 15 minutes of continuous operation.
Do not leave the blender in operation for more than 2 minutes at a time.
Do not operate the machine in the pulse mode for more than 5 seconds at a time.
Placement of the machine
Place the body of the machine onto a cleaned fl at and smooth area near a 230 V power socket with enough free space for operation
and handling.
Whipping, mixing and kneading
(1)
Move the lever for unfolding the top of the machine downwards and unfold the top of the mixer .
Place the lid of the stainless steel bowl into the fi xture so that the symbol for releasing the lid is aligned with the mark on the
(2)
metal collar of the fi xture and attach the lid to the body of the machine by rotating it all the way to the tightening symbol .
Attach the whisk, fl at beater or dough hook to the connecting piece, push upwards and connect to the connecting piece by
(3)
rotating .
(4)
Place the stainless steel bowl onto the base and tighten the bowl in the base by rotating it counter-clockwise .
Put an appropriate amount of ingredients into the stainless steel bowl. Press down the lever for folding the top of the machine, fold
(5)
the top of the machine and make sure that the lever has returned to a horizontal position .
Connecting the machine to the grid
Connect the power cord with plug to 230 V grid.
Switching the machine on and off
Switch on the machine with properly attached accessories and ingredients inside by setting the control knob to the required speed.
(6)
Once the ingredients are processed, switch the machine off by setting the control knob to the OFF position .
Pulse mode
For a brief intense whipping or mixing of food in the stainless steel bowl or for blending it in the blender, set the control knob to
the position for a maximum of 5 seconds and release it again. The control knob will return to the OFF position and the pulse
(7)
mode will be discontinued .
Whisk
Use the whisk for preparing thin food such as whipped egg whites, whipped cream, butter creams, dressings, etc. For whipping,
we recommend setting the speed control to 5 or 6, the recommended usual whipping time is 5 to 10 minutes and the ingredients
in the bowl/jar should not exceed 200 to 1,000 g.
Flat beater
Use the fl at beater with non-stick coating for mixing and stirring food of medium thickness such as thin batters and salads. For
mixing, we recommend setting the speed control to 3 or 4; the recommended usual mixing time is 5 minutes and the ingredients
in the bowl should not exceed 200 to 1,000 g.
6