Taurus GST1600 Bedienungsanleitung Seite 8

USE:
- Extend the cable completely before plugging
it in.
- Connect the appliance to the mains.
- Press the on/off button
- The pilot light comes on in red color.
- Leave to heat up for a few Minutes.
- Wait until the pilot light change to green will
indicate that the appliance has reached an
adequate temperature.
- During the appliance's use the pilot light will
come on and off automatically, indicating the
heating elements are working, and therefore
maintaining the desired temperature.
- Push the Steam button to start working
- Orient the appliance to direct the steam flow in
the desired direction
STEAM GARMENT:
- The steam garment is easy to use and is
perfect for removing wrinkles/creases from
garments and curtains as well as refreshing
furnishings fabrics.
- It can be used on most fabric as long as the
fabric is hanging or where the garment steamer
can be easily used in an upright position mo-
ving over the fabric in an up and down motion.
- NOTE: the garment steamer is designed to be
used in an upright position on hanging gar-
ments, refrain from using the steamer in or on
garments in a horizontal position.
- Hang the garment from a hanger and stretch
the fabric slightly with one hand.
- Check that there is ventilation behind the
fabric.
- Check garment pockets are empty.
- NOTE: we recommend you do not steam over
metal accessories, use caution and steam
around the metal accessories.
TO STEAM CURTAINS
1.wash and dry curtains as directed, according to
the fabric type.
2.hang the curtains and steam when they are
hanging in place.
3.lightly stretch the curtain with one hand while
steaming to help remove creases more easily.
TO STEAM UPHOLSTERY
1. The garment steamer can be used to help
freshen up upholstery, slip covers on furniture
and cushions from the furniture and in the room.
before steaming, always test on a small area of
the fabric that is not visible.
2. Keeping the garment steamer in an upright po-
sition and using and up and down motion. lightly
steam over the fabric of your furniture. cushions
should be removed and held upright for steaming.
allow cushions to dry thoroughly before replacing
on furniture.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Press the on/off button
- Unplug the appliance from the mains.
- Remove the water from the water tank.
- Let the product cool down.
- Clean the appliance.
ASSEMBLE THE ACCESSORIES (FIG 2)
- Attention: Always let the steamer cool down be-
fore assembling or removing the attachments.
ASSEMBLY OF ACCESSORIES:
1. Align the bottom protruding part of the accesory
into the bottom groove of the steam head.
2. Push the head of the accessory until the top
protruding part also clicks in the top groove of the
steam head.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
DECALCIFICATION
- If the appliance begins to begins to produce
steam more slowly than, or stops producing
steam and then starts again, you may need to
decalcify your steamer. Decalcification refers