Use The Digital Desktop; Activation And Power-Save Mode; Transcription; Use The Foot Control - Philips Digital Desktop LFH9750 Benutzerhandbuch

4

Use the Digital Desktop

4.1

Activation and power-save mode

The Digital Desktop is operated with a
power supply (Philips LFH0155); the Digital
Desktop is switched on and off by connecting
or disconnecting the device from the power
network.
If the device remains inactive for longer than
15 minutes, it automatically switches to the
power save mode and the display is switched off.
Reactivate the device by pressing any button.
4.2

Transcription

Move the
1
JOG DIAL
or
BACK SKIP/FWD
10
stopped to select the file to play and locate
the beginning of the recording.
Press the
2
STOP/PLAY
playback.
Adjust the volume (
3
) and speed (
SPEED
6
using the corresponding sliders.
To fast rewind, press and hold the
4
button
SKIP/ BACK
the button to start playback.
SKIP/BACK
To fast forward, press and hold the
5
button
SKIP/ FWD
the button to start playback.
SKIP/FWD
Press the
6
STOP/PLAY
playback.
User manual
or press the
SKIP/
4
button while
7
button to start
9
), tone (
VOL TONE
8
) during playback
11
while playing. Release
10
while playing. Release
7
button to stop
9
D Note
You can set the value for the automatic
backspace during playback of a recording with
the slider :
ABS
2
• Playback does not begin where the recording
was stopped, rather a few seconds earlier.
• To turn off the automatic backspace, set the
slider to 0.
4.3

Use the foot control

The Philips foot control is designed to offer an
ergonomic, hands-free tool for playback and
recording of files for transcription.

4.3.1 Installation

Connect the plug of the foot control to
1
the foot control socket
Desktop.

4.3.2 Transcribe using the foot control

The foot control 2210 has three pedals: fast
rewind
, fast forward
1
1
of the Digital
19
and playback .
2 3
2
3
7