Use Your Speechmike; Create A Recording; Use The Bar-Code Scanner (Lfh3300 Only) - Philips SPEECHMIKE series Benutzerhandbuch

4

Use your SpeechMike

This chapter describes how to use the
SpeechMike with Philips SpeechExec dictation
software. If the SpeechMike is used with third-
party software other than Philips SpeechExec,
some features may not be present or function
differently. For detailed information, refer to the
documentation delivered with the software.
4.1

Create a recording

The dictation microphone must be
1
connected to the computer with the USB
cable.
Start SpeechExec dictation software.
2
Press the
3
RECORD
d
recording and enter
• The recorder window is displayed.
• The record indicator light flashes red (in
overwrite mode) or green (in insert mode).
Press the key and start speaking.
4
e
The record indicator light glows in red (in
overwrite mode) or green (in insert mode) while
recording.
For short pauses, press the
5
continue recording, press the
To stop recording, press the
6
Press the
7
• E OL/• • P RIO
recording as finished.
• The dictation file is moved to the
dictations folder.
• The recorder window closes and the work list
window is displayed.
To assign priority status to the recording,
8
press the
• E OL/• • P RIO
a second.
D Note
For best results, speak clearly and keep the
microphone about 10 to 15 centimeters (4 to 6
inches) away from your mouth.
User manual
key to create a new
Record standby mode.
key. To
e
key again.
e
key.
RECORD
d
key to mark the
Finished
key again within half
4.2 Use the bar-code scanner (LFH3300
only)
Press the scan button and scan the
1
barcode. When a barcode is recognized,
the SpeechMike will beep and the barcode
information is inserted into the currently
active application as if the barcode number
is typed in digit by digit.
D Note
The barcode scanner allows barcode scanning
from a distance of up to 30 cm / 12 inches.
9