Firmware Upgrade - Bullit Rapsody Rsh-100 Bedienungsanleitung

HDD BASED MULTI A/V PLAYER
BULLIT RAPSODY RSH-100

Firmware upgrade

Firmware upgrade
New RSH-100 firmware can be downloaded from www.bull-it.ch.
The current version of the firmware in your RSH-100 is displayed on the
upper right-hand corner of the setup screen if you press SETUP.
Download the latest firmware from
Connect the RSH-100 to a PC and copy the firmware file to the RSH-100.
The firmware file name is usually rapsody-v121.bin, the number after
"rhapsody" denotes the firmware version.
Connect the RSH-100 to the TV and turn on the power. Select the firmware
file using the remote controller and press OK to run the firmware file.
The following screen appears when you press OK.
BULLIT RAPSODY
www.bull-it.ch
(c) 2005 by BULLIT™
English / 173
and unzip the file.
www.bull-it.ch