Bullit RAPSODY RSH-100 Bedienungsanleitung Seite 133

HDD BASED MULTI A/V PLAYER
BULLIT RAPSODY RSH-100
Screw in HDD holding screws
Assemble covers
BULLIT RAPSODY
Connect the HDD power cable as
shown in this picture.
After the HDD is correctly placed
inside the RSH-100, screw in the
HDD holding screws as shown in this
picture.
Insert the rear end of the cover first
and then gently press down the front
part of the cover.
Then screw in the screws with a
screwdriver (+).
(c) 2005 by BULLIT™
English / 132
www.bull-it.ch