Operation - ION Luxe LP Benutzerhandbuch

Operation

Playback
There are 3 ways to listen to your vinyl records with Luxe LP:
1. You can connect Luxe LP to a Bluetooth speaker. See the section
Bluetooth Speaker
2. If you prefer to use your own stereo speakers, you can connect Luxe LP's RCA outputs to a
stereo system or to powered speakers. Do not connect them to phono-level inputs; Luxe LP's
RCA outputs are line-level and could damage a device with phono-level inputs. Any other
standard input type, such as CD, Aux In, or Tape is acceptable.
3. You can listen through your computer speakers or with headphones connected to your
computer, once your computer soundcard's input device has been set to USB PnP Audio
Device or USB Audio Device, depending on your Windows operating system (USB PnP Audio
Device on macOS) and that you are record-monitoring the audio using EZ Vinyl/Tape Converter
or similar software (Luxe LP cannot be used as a playback device for your computer's audio).
See the section
details on how to configure sound playback.
Note (for European models only): Luxe LP will automatically power off after 10 minutes if no audio
is playing.
Pairing Luxe LP to a Bluetooth Speaker
Luxe LP has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly.
1. Power on your Bluetooth speaker and ensure it is in pairing mode.
2. Power on the Luxe LP turntable.
3. Press and release the Bluetooth button on Luxe LP to start pairing to your Bluetooth device.
Once Luxe LP is connected to the Bluetooth speaker, the Bluetooth LED will be solid blue. Your
Bluetooth speaker should also indicate that its paired.
Note: Luxe LP will connect to the closest Bluetooth speaker that is near it. If after 20 minutes no
Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive and
the LED will turn off.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
4. Play music on your Luxe LP turntable. If you are connected to a Bluetooth speaker and do not
hear audio, try pressing the play button on the speaker or try pressing the Bluetooth button on
Luxe LP.
5. Adjust the volume on your Bluetooth speaker (if applicable) or the Bluetooth Volume knob on
Luxe LP to control the output level.
6. To disconnect pairing, press and hold the Bluetooth button, power off the Luxe LP turntable, or
turn off pairing on your Bluetooth speaker.
Note: Before connecting to your Bluetooth speaker, move other Bluetooth receivers/speakers
out of range of Luxe LP (30'/9.1m or more) or turn them off.
6
for details.
Setting Your Computer's Soundcard as the Default Playback Device
Pairing Luxe LP to a
for