Rear Panel - ION Luxe LP Benutzerhandbuch

UI Panel
®
G. Bluetooth Button: Press this button to start Bluetooth pairing. To
cancel or exit pairing mode, press the Bluetooth button again. The LED
will blink when pairing with a Bluetooth device, and remain solid once
fully paired. If currently connected to a Bluetooth speaker, press this
button to disconnect from the speaker.
H. Aux Input: Connect a CD player, digital media player, or other audio
source to this 1/8" (3.5 mm) stereo auxiliary input. The audio from the
Aux Input is also transmitted over a Bluetooth connection.
I. Bluetooth Volume: This knob is used for adjusting the volume of a
connected Bluetooth speaker.
J. Volume/Power Knob: This knob is used both for powering on Luxe LP
and adjusting the speaker output volume. To turn Luxe LP on or off,
simply turn the knob. You will feel a click when Luxe LP turns on. To
adjust the volume, turn the knob left and right.
TIP: Due to the nature of Bluetooth, the Luxe LP speaker's output and
the Bluetooth speaker's output will be out of sync. Turn this volume
down when transmitting to a Bluetooth speaker.
K. Headphone Output: Connect headphones (sold separately) to listen to
your vinyl playback.

Rear Panel

L. USB Audio Output: Use the included USB cable to connect your turntable to your computer.
The USB connection will send audio from the turntable to your computer. Please see the
Luxe LP With Your Computer
M. Power Cable Input: Use the included adapter to connect to wall power.
N. RCA Output: The audio from a playing vinyl record is sent to this line-level RCA audio output.
Warning: The RCA Outputs are line-level. Please only connect these to line-level inputs. You
may damage your receiver if you plug in a line-level device into a phono-level input.
section of this manual for information.
Using
5