Rear Panel Features - ION POWER PLAY LP Kurzanleitung

QUICKSTART GUIDE
Make sure that the items listed below are included in the box:
o
POWER PLAY LP Turntable
USB Cable
45 RPM Adapter
READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
o
Go to http://www.ionaudio.com for product registration.
o
INTRODUCTION
POWER PLAY LP connects directly to your computer to turn your treasured vinyl recordings into digital music. We have
included two software packages to aid you in converting your vinyl recordings.
applications to take advantage of computer recording:
EZ Vinyl/Tape Converter (PC only) is the quickest and easiest way to turn your recordings into digital media. EZ
Vinyl/Tape Converter conveniently saves your recordings in your iTunes* library. Novice users may find this application
preferable. We have included a handy Software Quickstart Guide with step-by-step instructions on software installation
and operation.
EZ Audio Converter (Mac only) is a basic converter application for Mac OS X and is ideal for novice users. Please refer
to the included Software Quickstart Guide for step-by-step instructions on software installation and operation.
To install the software: simply insert the included CD into your computer and follow the on-screen instructions. After you finish
converting your vinyl, you can then burn to CD or load onto portable media devices.
Visit www.ionaudio.com/computer-optimization for more information on optimizing your computer for audio.
* iTunes and iPod are trademarks of Apple, Inc., registered in the U.S.A. and other countries.

REAR PANEL FEATURES

1. USB Audio Output:
included USB Cable to connect
your turntable to your computer.
The USB connection will provide
power to the turntable as well as
the audio from the turntable to
your computer. For transferring
your vinyl records
computer, we have provided two
different software packages on
the included CD. EZ Vinyl/Tape
Converter (PC) and EZ Audio
Converter (Mac) are the easiest
and quickest ways to transfer
your vinyl records and should be
used if you are a beginner.
2. Platter – Place your record here.
3. 45 RPM Adapter Holder – Holds
the included 45 RPM adapter.
When not using the adapter,
please place it in this holder.
4. Tonearm – POWER PLAY LP
comes with a ready to use pre-
balanced tonearm and cartridge.
The tonearm can be raised and
lowered by hand, or by pressing
the raise / lower lever. Please note that the tonearm needs to be
moved away from resting position (on the arm clip) for the
turntable motor to activate. When the tonearm is placed back in
its resting position, the turntable motor will deactivate.
5. Arm Clip – This specially designed arm clip secures the tonearm while at rest or when not in use. The arm clip has been
designed to remain in the up position while unlocked.
6. Raise / Lower Lever – Raises and lowers the tonearm.
7. Autostop – This switch activates or deactivates autostop, which stops the platter once the record has reached the end.
8. 33 / 45 / 78 RPM Switch – This switch controls the RPM of the turntable platter.
CD
Quickstart Guide
Safety Instructions & Warranty Information
Use the
to your
You should install one of the following
2
IMPORTANT: Remove the plastic cartridge cover
(needle cover) before operating the turntable.
1
1
3
7 4
5
7
6
7
8