Devolo Kurulum Mesh WiFi 2 Bedienungsanleitung Seite 12

| EN | PLC button
Duration of the
Action
button press
1 second Start pairing with other devolo adapters
> 10 seconds Reset devolo adapter to factory settings
PLC LED The devolo Mesh WiFi adapter ...
... is working perfectly. It is connected to other devolo
adapters.
... is currently establishing a pairing connection with
another adapter.
... is not connected to the network*
... is in standby mode.
... is currently undergoing a software update.
... has a poor Powerline connection.
... is currently in the start-up process.
... cannot see any other devolo adapters.
... no longer has any LED function since it was disabled by
the user.
21
LED behaviour
Flashes white
Lights up red
LED behaviour
Lights up white
Quickly flashes white
Flashes red
Slowly flashes white
Alternately flashes white and red
Lights up white and then briefly
flashes red
Lights up red
None
Wi-Fi button
Duration of the
Action
button press
1 second WPS function is being carried out
> 3 seconds Wi-Fi is being switched off
Wi-Fi LED The devolo Mesh WiFi adapter ...
... has a fault-free connection to the Internet.
... is attempting to establish a connection via WPS.
... no longer has any LED function since it was disabled by
the user.
* On page 25 you will see how to carry out manual pairing.
LED behaviour
Flashes white
LED goes out
LED behaviour
Lights up white
Flashes white
Off
22