Evolveo StrongVision PRO Bedienungsanleitung Seite 89

9.2. The Camera Takes No Photos
1. Make sure there is enough free capacity on the inserted SD
card. If the function of old files overwrite is switched off, the
device no longer records after the SD card is full.
2. Make sure the Li-Ion battery has enough power to operate the
trail camera.
3. Make sure the switch is in the ON position and not OFF.
4. Format the card on your computer to FAT32 before using it for
the first time
9.3. The Night Illumination Does Not Have Sufficient Range
1. Make sure the battery in the device is charged; at lower
capacities, typically below 15%, the night illumination may not
activate
2. For good night-time quality, place the camera in a dark place
without additional light sources.
3. Try to use the camera in places where it will be surrounded by
other objects that can reflect the IR illumination. If you place
the camera in an open space, the resulting photo will be poorly
lit. It is the same as shining a flashlight in the night sky, you will
not see anything, even if the flashlight is very powerful.
9.4. The Camera Does Not Send Any Photos to the Cloud
1. Make sure that the inserted SIM card has the PIN code request
deactivated.
2. Make sure the SIM is activated and has enough data volume to
transfer photos and Live streams!
3. Check that the correct international dialling code of your
country in the format "XXX" is entered in the application, e.g.
"420" for the Czech Republic
4. Make sure you saved all the settings in the application and
rewrote the immediate change
89