Start-Up - Evolveo StrongVision PRO Bedienungsanleitung

2. Start-up

Application
EVOLVEO CAM
Free unlimited Cloud Storage app for Apple iOS (version 13.1 and
above) and Google Android (version 9 and above)
Before the first start-up, remove all protective films from the
device, which are placed over the camera lens and the IR (infra-
red) sensor. These could otherwise prevent motion detection or
affect image quality.
A 10,000 mAh Li-Ion battery is inserted in the device from the
factory, remove it and fully charge it before use. The battery has
a charging connector and a charging status LED. The battery can
be charged even if it is inserted in the device!
TIP: For easier operation, a spare SGV CAM-BAT2 battery can be
purchased, which you can pre-charge using the integrated
charging connector and replace an already discharged one at the
installation site.
2.1. Insert an SD card into the device, the camera supports SD
cards up to 256 GB, the SD slot is located on the side of the
device next to the control panel.
65