and forget it, contact technical support at www.evolveo.com to
reset it
Format the storage – used to format the SD card inserted in the
device – all data will be lost during formatting.
Remove the device
Deletes the currently used devices from the application
9. Troubleshooting
9.1. The Camera Does Not Record Photographs/Video during
the Movement Detection
1. Check the PIR sensor for damage or a leaf blocking the view.
2. Try the camera in places without hot surfaces. The PIR sensor
detects movement based on the temperature difference, if the
surroundings of the camera are overheated, the sensor will not
be activated.
3. In some cases, the water surface may cause the PIR sensor to
activate unintentionally, in which case turn the camera away
from the water surface.
4. Set the camera not to directly face the ground.
5. Attach the camera so that it does not move and there are no
large moving objects, such as a large tree.
6. At night, the device can detect movement outside the beam
distance of the IR illumination, so no moving subject will be
recorded in the photos.
7. Sunset or sunrise may cause the recording to start
unintentionally – change the position of the camera.
8. If the animal/person in front of the camera is moving fast, the
camera may not detect them – move the camera further away
from objects (for example, away from the trail on which the
game is moving)
88