Cleaning And Maintenance - Bimar HR303A Bedienungsanleitung

⇔ Lower candle switch
⇔ Upper candle switch
⇔ Switch 0-I central
candle
1. Protection grill
2. Support
ASSEMBLING ASSEMBLING
ASSEMBLING ASSEMBLING
Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the
power cord is damaged, it must be replaced by the manufacturer or a competent qualified
electrician or a person with similar qualifications, in order to avoid any risk.
ATTENTION: The heater must not be used if the plugs are damaged glass.
Attention: The appliance may only be used if complete with the support. Attention Attention Attention
1) To operate easy, stand the appliance on a horizontal, flat and stable surface.
2) Unscrew the wing nut screws placed on the inferior part of the appliance.
3) Let the cable go out from the hole in the middle of the support and assembling the
support itself, putting it in the inferior body.
4) Put the wing nut screws through the support and screw them.
OPERATION N N N OPERATIO OPERATIO OPERATIO
First use First use
First use First use
Warning: run the appliance to eliminate the "new smell" and any oil residue from the
manufacturing process for at least 10/15 minutes. During this operation, ventilate the room well
to eliminate the "new smell" that is given off by the appliance.
To use the heater, act as follows:
1) Insert the plug into the power socket.
2) Press the switch 0-1 (Power) the candle in the middle will turn on. The other candles can be
turned on with their switches.
3) Switch on the key for the swinging (TURN) to let the stove swing to the left and to the right.
4) To switch off the appliance, put the keys on "O" position and remove the plug from the power
socket.
Never leave the appliance connected to the socket if it is not in use, especially for long periods. . . . Never leave the appliance connected to the socket if it is not in use, especially for long periods
Never leave the appliance connected to the socket if it is not in use, especially for long periods Never leave the appliance connected to the socket if it is not in use, especially for long periods

CLEANING AND MAINTENANCE

CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch off, unplug and wait for before it has Attention:
Attention: Attention:
completely cooled down.
• Protect the parabola from dust to keep save its reflecting characteristic.
• To clean the body use a soft damp cloth; do not use abrasive products.
• The protection grill and the smocking net are very delicate; to clean them only use your
vacuum cleaner, paying attention not to damage them.
• When the stove is not in use it is necessary to cover and put it in a dry place. We advise
to use the original packing to preserve it from dust and humidity.
• The halogen heater (230V 400W) must be substituted with a special tool: please
contact a competent qualified electrician.
• If you decide not to use the appliance any more, we recommend making it inoperative
by cutting the power cord (after making sure you have disconnected the plug from the
socket) and make dangerous parts harmless if children are allowed to play with them.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC
DIR DIRECTIVE 2011/65/EU. ECTIVE 2011/65/EU.
DIR DIR ECTIVE 2011/65/EU. ECTIVE 2011/65/EU.
15