Take Care Of Your E-Bike; Maintenance - Qwic Atlas Bedienungsanleitung

TO PROLONG THE LIFESPAN OF YOUR BIKE, QWIC ADVISES YOU TO PERFORM SOME BASIC
MAINTENANCE YOURSELF NEXT TO SCHEDULING CHECK-UPS AT YOUR DEALER ON A REGULAR

6.1 Maintenance

QWIC advises you to schedule a major check-up for your e-bike at least
once a year. The first maintenance check-up is recommended after
driving 250 km or 3 months after purchase. Performing a check-up on
regular basis will decrease the possibility of unnecessary damage to the
bike and lowers the amount of money spent on repairs.
You can keep your bicycle in a good shape by doing some basic
maintenance yourself, and in the next sections we will provide you with
some tips in doing so.
Cleaning
To make your bike look like new again, you can clean the it with
lukewarm water and a soft brush. Cleaning the bike on a regular
basis will also prolong the lifetime of the product. Please refrain from
using large amounts of water near the electronics and the battery
(compartment). When cleaning the bicycle it is best to remove the
battery.
bell Don't use a high-pressure water beam to clean the bicycle. A too
powerful beam of water can damage the electronics of the bike and
pre-emptively void the warranty.
46
BASIS.
Treatment
Next to the regular cleaning of the bike, we advise you to grease
uncoated metal components (such as the front fork, pedals etc.) with
acid-free Vaseline (spray) to prevent oxidation and rust. Rotating parts,
such as the chain, chainwheels and axes need grease or oil on a regular
basis as well. You can consult your dealer in helping you with this.
info
If your bike has a belt drive, do not grease the belt. It is intended
to run without any grease. Instead, clean your belt regularly with
lukewarm water.
Please find below some quick tips and tricks to maintain your e-bike:
>> Take care that there will be no dirt in between the motion sensor
and the rotating part. You can clean it with water and a sponge
when dirty
>> Check the tire tension and tire profile
>> Check for wear and tear on the brakes and brake pads, replace
or adjust them if needed
>> Check the spoke tension, visit your dealer when you notice that
spokes are bend or the wheel is damaged
>> Maintain all rotating and (electrical) connection parts with acid-free
Vaseline (spray)

6. TAKE CARE OF YOUR E-BIKE