Operation Tips - Revopoint 3D Technologies POP 2 Gebrauchsanleitung

POP 2 3D Scanner User Manual

Operation Tips

Lose Track
If the 3D Model Preview window displays a "Lose track" notice during scanning, please re-target the POP 2 3D scanner to a
previously-scanned area (blue) and keep still for several seconds so that the POP 2 can re-acquire tracking. When the red
portion of the display changes to green, scanning can resume.
Too Few Points
If the "Few Point Amount" prompts appear, check whether the distance between POP 2 and the object is too close or too far
and adjust the distance between the POP 2 and the object so that the distance indicator highlights "Excellent" before
scanning is continued.
21 COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED
When a "Lose Track" warning is displayed, please re-target the POP 2
cameras back to a scanned area (blue) and keep still for several seconds to
re-acquire tracking. Resume scanning when red changes to green.