Revopoint 3D Technologies POP 2 Gebrauchsanleitung Seite 16

POP 2 3D Scanner User Manual
Start or Pause Scanning
Click / to Start/Pause scan. The number above the Start button is the countdown before scanning starts.
During scanning, please make sure the point cloud in the lower-left window is adequate and the distance remains
"Excellent". Move the scanner slowly and deliberately during scanning while keeping a relatively fixed distance. Already-
scanned sections of the model are displayed in blue. Unless there are holes in the scan, there is no advantage to continuing
to scan a blue area (and it will waste memory and processing time).
14
COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED