Signs And Symbols; Product Information; Manufacturer´s Data; Machine Identification - Mafell A18 Originalbetriebsanleitung

1

Signs and symbols

2

Product information

for machines with product no. 91C801, 91C821, 91C901, 91C921
2.1 Manufacturer´s data
MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49
(0)7423/812-218, e-mail: mafell@mafell.de

2.2 Machine identification

All details required for machine identification are available on the attached rating plate.
This symbol is found in all places where you will find information for your
safety.
Non-compliance with these instructions may result in very serious injuries.
This symbol indicates a potentially hazardous situation.
If this situation is not avoided, the product or objects in its vicinity may get damaged.
This symbol indicates tips for the user and other useful information.
CE symbol to document compliance with the basic safety and health requirements
according to Appendix I of the Machinery Directive.
For EU countries only
Do not dispose of electrical tools together with domestic waste!
In accordance with the European directive 2002/96/EC on waste electrical and
electronic equipment and transposition into national law, obsolete electrical tools
must be collected separately and recycled in an environmentally-compatible manner.
Read the operating instructions. This reduces the risk of injury.
Protect the rechargeable battery from heat, excessive solar radiation, fire, frost, water
and humidity.
Protect rechargeable battery packs from humidity!
Protect rechargeable battery packs from fire!
There is danger of explosion!
Cordless Allicance System (=CAS) is a cross-manufacturer battery pack system.
Further information is available at www.cordless-alliance-system.com
-17-