General Information; Technical Characteristics; Safety Devices - Felisatti MTF 216/1100T Bedienungsanleitung

TECHNICAL DATA
Mitre saw
Absorbed power
No-load speed
Cut at 90º/mitre (AxB Fig.4 a)
Cut at 45º/mitre (AxB Fig.4 b)
Cut at 90º/blade at 45º (AxB Fig.4 c)
Cut on upper bench
Upper bench dimensions
Blade diameter
Blade hole diameter
Weight
Overall dimensions (LxHxW)
Acoustic pressure, Lpa
Sound power emitted, Lwa
Vibration level (according to ISO 8041 and ISO 5348)
Carefully observe the instructions in this manual, keep it in a safe
place at hand for any possible checks on the parts indicated.
If the tool is used with care and a normal maintenance is carried
out, it will have a long life.

GENERAL INFORMATION

A Saw penetration adjustment screw (Fig.1a)
B Uptake connection nozzle (Fig.1,1a)
C Pushbutton switch (Fig.1)
D Safety hook release button (Fig.1)
E Switch lock button (Fig.1)
F Upper bench saw protector (Fig.3)
G Upper bench (Fig.1,1a)
H Upper bench blocking handles (Fig.2)
I Saw blade (Fig.1,2)
J Mobile guard (Fig.1)
K Turntable (Fig.1)
L Base (Fig.1,3)
M Fixed guide (Fig.1)
O Motor unit blocking lever (Fig.1)
P Position lock pin (Fig.1a)
Q Fixed saw protection, extractable (Fig.1а)
Q1 Protection button (Fig.1,1a)
R Scale index (Fig.1)
R1 Graduated scale for turning the motor unit (Fig.1)
R2 Graduated scale turntable (Fig.1)
S
T Upper bench guide (Fig.1,3)
V Handles (Fig.3) (Optional accessory)
Y
MTF216/1100T
W 1100
/ min 5000
mm 58x133
mm 58x90
mm 35x133
mm 31,5
mm 224х358
mm 216
mm 20(30)
Kg 9,5
mm 427x277x531
dBA 96
dBA 109
m/sec2 2,5
Z1 Adjustment bolt (Fig.1a)
Z2 AC cable (Fig.1)
Z3 Brush holder cover (Fig.1)
Z4 Clamp (Fig.5) (Optional accessory)

TECHNICAL CHARACTERISTICS

The robust and highly reliable structure makes these mitres
suitable for cutting wood, aluminium and steel in industrial
environments, while preserving their usual ease of handling and
without restricting their movement.
upper table that allows the mitre saw to be transformed into a
table saw to carry out cutting (up to a thickness of 45 millimetres).
working tables (upper and lower), and have been provided with a
switch to keep the circuit on while pressing, and a lock-on button
for free-hands operation when working on the upper bench.
new electronic device to prevent the machine from starting
unexpectedly after a break in the voltage supply. When this
happens, to restart you must oper-ate the switch to switch-off
and then to switch-on.
A single operator is needed to use the mitre saw, of which the
design and construction comply with stan-dards EN 61029-1 and
EN 60204-1.

SAFETY DEVICES

• rest, the blade is totally covered by two At
the descent of the blade unit when cutting.
• On the upper bench, the blade is covered by one protection
MTF250/1500T
1500
4300
70x150
70x85
47x150
45
264х385
250
20(30)
11
460х450х300
92
105
3,9
protec-tors,