Indicator And Operating Elements; Commissioning - Rothenberger RODIA DRY CLEANER 1600 Bedienungsanleitung

3.2

Indicator and operating elements

Select from the following functions and settings:
Vacuum cleaner is switched off
0
Vacuum cleaner is running
I
Ready mode for ON/OFF auto-
A
matic mode
Filter cleaning function
R
RA Ready mode for ON/OFF auto-
matic mode
Automatic shaker function
Fill level indicator
Speed regulation
3.3

Commissioning

Switching on and off Electric tools:
The plug socket on the vacuum cleaner will always be live when the mains plug is plugged in, ir-
respectively of the position of the switch.
Electric tools and compressed air tools must be switched off when they are connected!
Note: If the switch is in the >0< position, the plug socket on the vacuum cleaner can be use as
an extension lead. Connection value: Vacuum cleaner + connected unit,maximum 16 A.
Insert the plug into socket
>0< Vacuum cleaner is switched off
>I< Vacuum cleaner switched on without shaker function
>A< Vacuum cleaner on standby The vacuum cleaner only switches on when the tool is
switched on. After the tool is switched off, the vacuum cleaner runs on for approx. 10
sec to prevent any residue from collecting in the hose.
>R< Filter cleaning function
>RA< Ready mode like >A< plus automatic filter cleaning
Set the vacuum cleaner to the switch position >0<
Pull out the plug after you have finished
Fix the suction hose in the accessory storage location on the back of the container for stor-
age.
The ends of the hose can be pushed into each other to prevent particles of dirt from coming
out.
Switching on and off vacuum cleaner:
Push the plug of the vacuum cleaner into the plug socket.
Set the desired operating mode on the switch. The vacuum cleaner is ready for suction.
After vacuum cleaning, set the switch to „O". The vacuum cleaner is switched off.
Pull the mains plug of the vacuum cleaner out of the plug socket.
18
Plug socket current-conducting
Plug socket current-conducting,
Automatic shaker function off
Plug socket curren-conducting,
The vacuum cleaner is switched on and off via the
connected electrical/compressed air tool at the plug
socket
In this switch setting the vibrator is activated for approx.
10 sec. and then switches off again automatically
Ready mode like "A" plus automatic filter cleaning
Filter cleaning is performed (switch setting RA) auto-
matically during the next working break when the
minimum volume flow level is reached
When the container is full and/or there is a blockage in
the suction hose, the full indicator lights up
The suction performance can be regulated using the
speed regulator
ENGLISH