Other; Maintenance Instructions; Cleaning; Technical Data - Beko EFT6100W Bedienungsanleitung

All manuals and user guides at all-guides.com
4

Other

4.1 Maintenance instructions

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service
personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do
not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the
following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.

4.2 Cleaning

1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap. Thoroughly remove soap
film with dry cloth.

4.3 Technical data

Power supply: 220V-240V, 50Hz
Technical and design modifications reserved.

4.4 Remark

Ensure that the fan is switched off from the supply mains before removing the guard.
Table fan / User Manual
9 / 44 EN